Essilor Instruments APH 550, Maintenance Manual

Page: 44 / 78

42
7-2 Function of each menu of maintenance mode
7-2-1 Calibration
The screen on the right appears by selecting this menu.
The details of each button on the screen are described
below.
PD,WD button
: Screen which can change the setting of
PD and WD appears.
Left button
: Screen which can change the setting
value of the left lens appears.
Right button
: Screen which can change the setting
value of the right lens appears.
Disk Clear button : Each motor does the initial performance.
OK button
: Save the setting value and exit the mode.
【
Changing procedures of setting value
】
1. First, touch the button which to be changed, “PD, WD button”, “Left button” or
“Right button”.
2. Next, select the “Adjust area” of the setting value to be changed.
It can be selected with the touch panel or, or of the selection key.
3. Change the setting value with the +/
－
key or the dial switch.
The value is changed substantially if pressing and holding the +/
－
key.
4. Then, touch the “OK button” when all of the setting values are changed.
It saves the changed values and finishes the process.
PD,WD button
Left button Right button
Adjust area
Disk clear button
OK button
Screen when Left button is selected
Adjust area
Screen when Right button is selected
Adjust area