Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com
18
Programming Individual Users
Authorized users (master code or any user authorized to program) can
program users directly from the Keypad. Each Individual User can be as-
signed various authorizations. Review System Setup before programming
individual users.
1. Enter
* 1
2. Enter an Authorized Code followed by
#
Example:
* 1 1 2 3 #
This opens programming and causes:
3. Proceed to one of the following seven programming options:
Adding a New User
a. Enter
1 #
b. Enter the User ID (1 to 500) followed by
#
c. Enter the User Code/PIN (3-8 digits), followed by
#
d. FOR NO AUTHORIZATIONS, SKIP TO STEP E. To give special
Authorizations, enter the Authorization Code, followed by
#
.
Repeat for additional authorizations.
Code User Authorization
1
Latching Authorization
2
Program or Delete Users Authorization
3
Output A Authorization (see notes)
4
2nd Door (see notes)
5
Output B Authorization (see notes)
6-7
Continued on next page
Red LED Green LED
Slow Flash Solid
