Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com
12
Programming System Setup
The System Setup can only be modified if you know the Master Code.
When the system is initially set up, the default system settings should be
reviewed prior to other programming.
1. Enter
* 3
2. Enter the Master Code followed by
#
Example:
* 3 1 2 3 #
This opens programming and causes:
3. Proceed to one of the following eight programming options:
Changing the Master Code (Default: 1,2,3)
a. Enter
1 #
b. Enter the New Master Code followed by
#
c. Return to Step 3 or enter
* *
to exit programming.
Keypad Status After Step Completion
Step
Beep Red LED
Green LED
a
Double Fast Flash Slow Flash
b
Triple Fast Flash Solid
Note
: If you forget the Master Code, momentarily ground the
ORANGE wire. This will take you to Step 3 of Programming System
Setup. Once you enter setup mode, you have 30 seconds to begin the
program sequence.
Red LED Green LED
Fast Flash Solid
