RII113-A-201222.docx
Page 9 of 15
4.4.1.
This jumper only is functional for the Wiegand model reader.
4.4.2.
The indicated jumper selects whether the reader LED will have the red led on or
off in standby.
4.4.3.
Place the jumper from the center to the right to have the LED off in standby, or
place the jumper from the center to the left to have the LED on in standby.
4.5.
Setting OSDP RS-485 bus termination resistor;
Figure 4 RS-485 Termination Jumper Location.
4.5.1.
This jumper is only for the OSDP model reader. The indicated jumper will
terminate the RS-485 bus with a resistor. It is recommended to install this jumper
if the reader is at the end of the RS-485 bus, or otherwise requires this line to be
terminated.
