Page 8
G500-G525-I02-070214
COMMISSIONING THE STOVE
The stove is fitted with a pilot light, pulse spark ignition and flame-sensing device.
The control knob is located behind the right-hand foot of the stove.
The pilot light is centrally located.
Should the stove be extinguished for any reason wait 3 minutes before attempting
re-ignition.
Connect a suitable pressure gauge to the pressure test point.
Fit AA battery to spark generator as shown below
Fig 6 – Battery Compartment
1.
Unscrew battery cover to fit battery.
2.
Replace battery
3.
Refit battery cover.
Lighting the Pilot
Depress control knob fully. Whilst depressed turn knob slowly through 80° anti-
clockwise to
PILOT
setting. Continue to depress the control knob, the pulse spark
ignitor should be heard and the pilot should light. Repeat until pilot is visibly lit. If
necessary, the operation of the spark can be viewed by temporarily opening the front
door.
Keep knob depressed at this point for 10-15 seconds and release the knob. The pilot
light will remain lit.
