Page 2
39P-I01-160617
INSTALLATION INSTRUCTIONS
CONTENTS
Important Notes
Page 2
Commissioning the Heater
Page 16
Technical Information
Page 4
Customer Briefing
Page 25
Dimensions
Page 5
Commissioning Checklist
Page 26
Installation
Page 6
Servicing Instructions
Page 26
IMPORTANT NOTES
This is a h igh efficiency, flueless catalytic, live flame effect heater. It provides
radiant and convected heat, both efficiently and safely utilising the latest type of
catalytic convector burner technology. I t is recommended only as a secondary
heat source.
Before installation, ensure that the local distribution conditions identification of
the type of gas and pressure and the adjustment of the heater are compatible.
Refer to the d ata label, visible when the front is removed (See fig 2).
If the heater is to be used for Propane, the M8 aeration screw should be fitted. If
the heater is to be used for Butane, or Butane/Propane mix or Natural Gas this
aeration screw MUST NOT BE FITTED (Fig 6B).
This heater has either a manually controlled gas valve which can be adjusted
by the control knob on the front of the gas valve, located on the lower right
hand side of the heater behind the front panel or a remote controlled
valve operated via a handset.
When the heater is specified for the corner configuration, it is available with a
remote gas valve only.
This heater incorporates a combustion monitoring system (ODS). It must not be
adjusted or put out of operation. If replaced then manufacturers original parts
must be used.
Summary of Contents for 39 Portrait
Page 37: ...Page 37 39P I01 160617...
Page 38: ...Page 38 39P I01 160617...
Page 39: ...Page 39 39P I01 160617...
