Page 18
39P-I01-160617
REMOTE CONTROL BURNER
The heater is fitted with a pilot light, which is also an oxygen depletion sensor (O.D.S),
piezo spark, and flame sensing device. The control is located behind the front panel on
the right hand side of the heater. The pilot light is located at the right hand end of the
burner.
Should the heater be extinguished for any reason wait 3 minutes before re-ignition is
attempted.
To check pressures, with the outer glass or steel panel removed, slacken the pressure
test points sealing screws and connect a suitable pressure gauge to the pressure test
points (Fig 6D).
BATTERY FITMENT
Insert the supplied 9V battery in the handset and the four supplied 1.5V AA batteries in
the receiver as shown in Fig 8A & 8B
Fig 8A Handset battery fitment
Fig 8B Receiver battery placement
Summary of Contents for 39 Portrait
Page 37: ...Page 37 39P I01 160617...
Page 38: ...Page 38 39P I01 160617...
Page 39: ...Page 39 39P I01 160617...
