Page 14
INSTALLING
M
INIMUM OPERATIONS TO VERIFY PROPER
INSTALLATION
1. PROGRAMMING
Access to programming: lift the local telephone handset and dial
.
The programming activated message will be heard.
Program a telephone number for the emergency-call alarm:
dial
< telephone number >
.
Record the identification message of the specific elevator (max. 22
seconds), which is meant to contain all necessary information
concerning the elevator location: dial
and, after the
"Correct" message, pronounce the message and hang up.
To listen again to the previous message: lift the handset and dial
.
Make an external call to check the telephone line presence: dial
and,
after the "Correct" message, digit the telephone number to make a test
call.
2. TESTING THE ALARM PROCEDURE
Press the emergency call button for more than 2 seconds (factory
value).
The alarm starts.
3. ANSWERING THE ALARM
Note: the activation mode of the communication with the trapped
person can be configured with the “Two-way communication
mode during an alarm” programming (code 78).
-1
st
mode: automatic two-way connection established after the messages
(factory default)
Answer by the called party.
The two-way communication mode will be activated after the voice messages.
Speak with the trapped person.
-2
nd
mode: two-way communication established after input of "Communication
activation" code
Answer by the called party.
The voice messages will be heard.
