Page 10
INSTALLING
C
ONNECTING THE LOCAL TELEPHONE
Connect the local telephone (for programming and managing the
device) directly to the RJ11 connector (L in the picture at page 2) or to
TEL and – terminals (irrespective of the polarity).
C
ONNECTING THE FILTER INPUT
Connect the filter contact as per one of the modes shown in the table:
C1 TERMINAL CONNECTED TO:
FILTER CONTACT
TERMINAL BLOCKS
+12
IN1 /
–
–
IN1
/
+12
external reference
IN1 / external reference
C
ONNECTING THE AUXILIARY INPUT
Connect the external contact (normally open) to ALZ and – terminals.
Note: the ALZ input must be programmed as auxiliary input (by
setting parameter 55).
C
ONNECTING THE RELAY
Connect the output RL1 (normally open contact) to the external device.
R
EPLACING BATTERY
ATTENTION
Only use replacement batteries supplied by Esse-ti.
