INSTALLING
Page 15
M
INIMUM OPERATIONS TO VERIFY PROPER
INSTALLATION
1. PROGRAMMING
Access to programming: lift the local telephone handset and dial
.
The programming activated message will be heard.
Program a telephone number for the emergency-call alarm:
dial
< telephone number >
.
Record the identification message of the specific elevator (max. 22
seconds), which is meant to contain all necessary information
concerning the elevator location: dial
and, after the
"Correct" message, pronounce the message and hang up.
To listen again to the previous message: lift the handset and dial
.
Make an external call to check the telephone line presence: dial
and,
after the "Correct" message, digit the telephone number to make a test
call.
2. TESTING THE ALARM PROCEDURE
Press the emergency call button for more than 2 seconds (factory
value).
The alarm starts.
3. RESPONDING TO THE ALARM AND RESETTING IT
From the called number answer the call.
After listening the "Emergency request" voice message and the elevator
identification message a connection is automatically made with the handsfree
terminal.
To stop the alarm press
.
If the alarm procedure cannot be interrupted remotely (e.g., the programmed
telephone number is incorrect) simply
l
ift the handset of the local telephone and
dial
*
<Key word>
#
(factory:
) or briefly pressing the reset button.
Summary of Contents for Helpy GSM-RM
