Esse-ti Helpy GSM-RM, Quick Manual

Page: 5 / 32

INSTALLING Page 5
INSTALLING
I
NSTALLING THE ANTENNA AND INSERTING THE
SIM
CARD IN THE
GSM
SATELLITE
Before proceeding, make sure the device is off and use all due precaution to
avoid electrostatic discharge.

Remove the GSM satellite cover.

Screw the antenna in the appropriate connector (take care to only rotate
the metal ferrule to fix the antenna; do not rotate the antenna on itself).

Push the SIM Card housing cover as indicated by the arrow OPEN until it
unlocks and lift it.

Carefully slide the SIM Card into its housing cover.

Lower the SIM Card housing cover and push it as indicated by the arrow
LOCK until it locks in place.

Close the GSM satellite cover.
ATTENTION
It is not required to remove the PIN code prior to
the use of the HelpyGSM-RM.
The PIN code can be entered, if necessary, by
setting parameter 282.
ATTENTION
In order to avoid damage, never power up the
device without having first installed the antenna.
C
ONNECTING THE
GSM
SATELLITE

Connect the RJ45 connector of the GSM satellite to the RJ45 connector
of the HelpyGSM-RM (A in the picture at page 2) by means of the
supplied cable.