Esse-ti Helpy GSM-RM, Quick Manual

Page: 24 / 32

Page 24 PROGRAMMING VIA SMS
PROGRAMMING VIA SMS
Programming via SMS can be performed from any mobile phone or other
device that can send SMS messages. An SMS notifying the programming was
performed is sent by the HelpyGSM-RM to the number that sent the
programming.
ATTENTION
Programmed performed via SMS sent from the
Internet could not have a positive result if the
required format is not followed.
MESSAGE FORMAT
Each programming SMS must contain the password, which allows access to
programming, and the programming codes to be performed.
The message format must be as follows:
Et.hg *xxx# c..c c..c
Where:
Et.hg
: is the start of the programming string
*xxx# : is the password string (default installer password xxx = 0)
c..c : programming code
The strings and programming codes must be separated by a space.
Refer to the related paragraphs for the programming codes.
NOTIFICATION MESSAGE FORMAT
The format of the notification message to the user who sent a programming
SMS is similar to the programming message:
Et!hg *xxx# c..c c..cERROR
Where:
Et!hg : is the start of the programming string
*xxx
# : is the password string (default installer password xxx = 0)
c..c : is the accepted programming code
c..cERROR : is the refused programming code