Esse-ti 4GRouter, User Manual

Page: 14 / 60

Page 14
4GRouter mounting operations

Check the 4G LTE/UMTS/GSM signal strength through the green
indicator LED (see chapter “Signals”, page 57) and identify an area
where the signal is strong enough.
Note: the signal strength may vary according to the telephone
provider.

Drill two holes with 5 mm diameter on the wall at a distance of 50 mm.

Insert the 2 wall plugs and screws down until the screws are at a 5 mm
distance from the wall.

Place 4GRouter onto the two screws through the two back slots.
Inputs connection

Connect the external contact to IN1 (or IN2) and GND terminals.
Relay outputs connection

Connect the external contact to RL1 NO (or RL1 NC) and RL1/2 C
terminals.

Connect the external contact to RL2 NO and RL1/2 C terminals.