Esse-ti 4GRouter, User Manual

Page: 11 / 60

Page 11
INSTALLATION
Installation recommendations

4GRouter must be installed in a location where the radio signal allows for
using the 4G LTE/UMTS/GSM system.

It is advisable to leave plenty of space around 4GRouter for maintenance
operations.

Do not install 4GRouter outdoors, since it lacks protection devices against
weather conditions that can damage 4GRouter (water, humidity, etc.).

Do not install 4GRouter near magnetic devices.

Do not install 4GRouter near electronic devices (radio or TV sets, Personal
Computers, wired radio systems, etc.) that could be subjected to RF
interference from 4GRouter; recommended distance from the antenna is min.
2,5 m.

Do not install 4GRouter near medical devices. E.g. its operation may cause
damage to hearing aids or pacemakers.

Always make sure that 4GRouter operation is permitted in the place of
installation (e.g. installation is not allowed in hospitals, airplanes, etc.).
Inserting the SIM card
Before inserting or replacing the SIM card, always make sure that 4GRouter
has been disconnected from the mains and that no electrostatic discharge is
present in order to avoid damaging it.

Carefully slide the SIM card into its housing cover.
WARNING
The SIM card PIN must be DISABLED. If the PIN is enabled, it
must be disabled through a mobile phone.
WARNING
The SIM card must have a DYNAMIC PUBLIC IP address, if
the router is to be accessed using a Dynamic DNS service.