Page 49
TELEPHONE GATEWAY SERVICES
I
NCOMING CALLS
Allows you to answer incoming calls.
Upon receiving a phone call, the LED indicating the line status (white) will
blink shortly 4 times every 4 seconds as described at chapter “Signals” (see
page 57).
If a telephone is connected to 4Grouter, it will be ringing.
Pick up the handset to answer the call.
The LED indicating the line status (white) and the LED indicating the device status (red) will turn
on and the communication with the calling party will be set up
.
O
UTGOING CALLS
Allows you to dial over the mobile network.
If 4GRouter is connected to a PABX, autodialer or other telephone device,
please refer to the relevant instructions.
If 4GRouter is connected to a telephone:
Pick up the handset.
The LED indicating the line status (white) will turn on and the dialling tone
will be heard.
Dial the telephone number to be called.
When the called party answers, the LED indicating the device status (red) will
turn on.
Note: once you have dialled the number, you can either press # to
send the number immediately, or you can wait for the call to be
automatically forwarded once the inter-digit dialling time has
elapsed (by default 5 seconds).
Note: in the event you receive the dissuasion tone picking up the
handset, check if the signal is present and make sure the SIM
card is working correctly.
Summary of Contents for 4GRouter
Page 1: ...10 12 2019 User s manual...
Page 24: ...Page 24...
