Page 51
COMNET DATA TRANSMISSION
The
COMNet
system allows users to connect remotely with devices equipped
with RS232/RS485/CAN BUS, replacing traditional serial communication
which is commonly performed locally (i.e. between peripherals and custom
boards – Fig. A – or between a PC-based proprietary application and a lift
controller board – Fig. B –).
Figure A: example of local serial communication
Figure B: example of local serial communication
Figure C: general example of remote serial communication
Setting up a
COMNet
system requires:
- connecting a
4GRouter
(properly programmed) to the serial port of the
remote device to be controlled (the SIM card to be inserted into the gateway
must be enabled for voice/SMS/data traffic)
- installing the
COMNet PC Client
software in the PC which will be used for
remote-monitoring (the PC must be able to access the Internet) or use similar
proprietary application (PC application, mobile app, web server or other
solution respecting the COMNet protocol).
Summary of Contents for 4GRouter
Page 1: ...10 12 2019 User s manual...
Page 24: ...Page 24...
