Spraybar DN25 Installation Manual
6
14/06/2021
SECTION 2 - INTRODUCTION
The
ESS
Spraybar is primarily intended as a Conveyor Belt washing Spraybar to be used
in conjunction with a Conveyor Belt Cleaning system. It is normally positioned between the
Primary and Secondary Cleaners, on the lower face of the head pulley.
The
ESS
Spraybar is designed to remove sticky adhering material from the Conveyor Belt
surface by use of a high velocity, low volume, knife edge spray.
The
ESS
Spraybar has the added benefits of keeping both the Primary and Secondary
cleaners free of material build-up (when positioned appropriately), as well as assisting in
dust suppression.
The Spraybar is constructed from DN25 Stainless Steel Pipe, with Wash Jet Spray
Nozzles positioned along the centreline of the pipe.