MAGPRO16 Addressable Fire Alarm Panel – Installation and Programming Manual
7
Main power supply
In normal operating conditions, the fire panel is powered from the mains voltage line. In case of mains voltage line loss
the fire panel is equipped with one rechargeable battery. The characteristics of the main power supply are as follows:
Main power supply: 90
264 VAC
Frequency: 47
440 Hz
Electrical output: 4.2
А
Backup (accumulator) power supply
Voltage output (U): 13,65V
Accumulator battery: 1 x 12V / 18Ah, sealed lead-acid type rechargeable battery
Internal resistance of the accumulator battery Ri: < 0.
3Ω
Max. dimensions of the accumulator battery
: 167х181х76mm
Type of the battery connection: with a cable lug
, Ø5mm (M5) or cable shoe (according the type of the battery
terminals)
Loading capacity
Max. loading capacity of one loop: 500 mA DC
Max. loading capacity of AUX output: 500 mA DC
Max. loading capacity of outputs
SND1
and
SND2
: 500 mA DC
Max. loading capacity of outputs
FIRE
,
FAULT
and
EXT
: 300 mA DC
Max. total loading capacity (sum of the four mentioned above): 2.0 A DC
Programmable relay outputs: 15A@24VDC
Consumption
From the main power supply in standby mode:
o
For a minimum configuration: 60 mA AC
o
With mounted second loop controller: 65 mA AC
From the backup power supply in FAULT mode and generated message
‘AC loss’:
o
For a minimum configuration: 125 mA DC
o
With mounted second loop controller: 213 mA DC
List of the used fuses
Main power supply
: 4А, Т type, glass time-delay fuse, size 5х20mm
AUX output
: 0,5А, PTC type, resettable fuse
Outputs: 0.
3А, PTC type, resettable fuse
Accumulator: 7.
0А, PTC type, resettable fuse
List of spare parts kit:
1
Resistor
10k ± 5%, 0.25W
6 pcs
2
Resistor 47
k ± 5%, 0.25W
4 pcs
3
Resistor 20
k ± 5%, 0.25W
3 pcs
4
Screw 4.
2х38, cross slot DIN7981
4 pcs
5
Anchor
6х30mm
4 pcs
6
Fuse 4
А, glass time-delay type 5x20mm
(for the power supply)
4 pcs
ATTENTION!
Qualified specialists only should install the panel.
The electronic components of the panel are vulnerable to electrostatic discharge.
Never add or turn off components which are being power supplied!
