ESP MAGPRO16 Installation And Programming Manual Download Page 41 | Manualshive

Page: 41 / 55

background image

MAGPRO16 Addressable Fire Alarm Panel – Installation and Programming Manual

41

7.5. Panel Outputs Menus

This menu allows the installer to disable/ enable and to set time delay for some of the outputs of the control panel:

- Sounder Outputs (SND 1, SND 2)
- Extinguish Output (EXT)
- Fire Output (FIRE)
- Fault Output (FAULT)
- Four Relay Outputs

The menu is accessible from access levels 2 and 3.

To set outputs parameters, enter in the

installer’s menu - 5. PANEL OUTPUTS. The submenus are allocated in two

screens.

7.5.1 Sounders Outputs

In this submenu the installer can disable/ enable the sounders activation and the time delay operation.
To access the SOUNDER submenu, enter in the

installer’s menu - 5. PANEL OUTPUTS - SOUNDER (1).

Attention: In access level 2 you can only review the set delay status (ON/ OFF), with no rights to change it!

The functional buttons have the following action:

(2)

- Press to change the status of the sounder outputs. Every

pressing of the button changes alternatively the ENABLED -
DISABLED status. When the sounder outputs are disabled the LEDs
‘Sounder Output Fault/ Disable’ and ‘Disable’ light on permanently.

(4)

- Press to set the time delay operation. Every pressing of the

button changes the ‘Delay’ setting:

•

ON

- The delay of sounder outputs will be active when DAY operation mode is set - see the description for

menu 6.3 DAY/ NIGHT operation modes.

•

OFF

- No delay of sounder outputs activation. The sounder outputs are activated immediately.

•

SCHEDULE

- The delay of sounder outputs will be active on schedule - see the description for menu 6.3

DAY/ NIGHT operation modes.

All set parameters are confirmed wit ENTER button.

7.5.2 Extinguishing Output

In this submenu the installer can disable/ enable the extinguish output activation. To access the EXTINGUISH
submenu, enter in the

installer’s menu - 5. PANEL OUTPUTS - EXTINGUISH (2).

The functional button has the following action:

(2)

- Press to change the status of the extinguish output. Every

pressing of the button changes alternatively the ENABLED -
DISABLED status. When the extinguish output is disabled the LED
‘‘Disable’ light on permanently.

All set parameters are confirmed wit ENTER button.

«
...
39
40
41
42
43
...
»

Summary of Contents for MAGPRO16
























































Reviews:

No comments

Related manuals for MAGPRO16

Brand: 3xLogic Pages: 25

VX-2A-B-IWD (R)

Brand: 3xLogic Pages: 80

Brand: Rae Pages: 4

Brand: Malta Dynamics Pages: 16

Brand: Nacon Pages: 12

Brand: JBL Pages: 2

Brand: JBL Pages: 4

Brand: Neat Pages: 30

Brand: VENCO Pages: 4

MODULEX EXT Series

Brand: Unical Pages: 52

Brand: Amico Pages: 4

CIRFLEXX UMS 4100

Brand: Grundig Pages: 38

Brand: 2gig Technologies Pages: 4

Brand: Abus Pages: 92

Brand: MAC TOOLS Pages: 20

Companion Bullet mini LE

Brand: Axis Pages: 50

Brand: Gude Pages: 122

Brand: Pure Acoustics Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands