ESP MAGPRO16 Installation And Programming Manual Download Page 44 | Manualshive

Page: 44 / 55

background image

MAGPRO16 Addressable Fire Alarm Panel – Installation and Programming Manual

44

7.6.2 Setting the Date and Time

Attention: The setting of the date and time is available only from access level 3!

In this submenu the installer can set the current time and date for the panel.
To access the TIME/ DATE submenu, enter in the

installer’s menu - 6. GENERAL SETTING - 6.2) TIME/ DATE. The

screen displays:

The editable field is blinking. Use the up and down arrows to set the date and time. Use the left and right arrows to
switch over the editable fields.

IMPORTANT NOTES!
The MAGPRO16 panel is equipped with built-in battery for saving the set time and date in case of
main or back-up power supply lost.
Put a jumper on JP7 terminals on the control panel PCB to enable the built-in battery and saving the
set time and date.

7.6.3 Setting Day/ Night Alarm Modes

In this submenu the installer can set the operation alarm mode of the panel.
To access the DAY/ NIGHT submenu, enter in the

installer’s menu - 6. GENERAL SETTING - 6.3) DAY/ NIGHT. The

screen displays:

Press the functional button ‘2’ to select the preferred alarm mode:

NIGHT

- Select to set nighttime alarm mode. The devices will operate

only in night alarm mode.

DAY

- Select to set daytime alarm level. The devices will operate

only in day alarm mode.

SCHEDULE

- Select to set operation on a schedule. The devices will

operate on the programmed schedule.

The schedule is set in DAY/ NIGHT SCHEDULE submenu - press
functional button ‘4’.

In DAY/ NIGHT SCHEDULE submenu the installer can define the
day and night time intervals for all days of the week. The current
editing value is blinking.

(1) DAY CHANGE

- Press to change the day of the week. Use the up

and down arrows to set the day and night time intervals for the day.
Use the left and right arrows to switch over the editable fields.

(2) ALL

- Press to set the current set day and night time intervals for

all days of the week.
Confirm all settings with pressing ENTER button.

Increasing

Switching between the
editable fields

Decreasing

Set a jumper on JT7 terminal to

enable the BATT1

24VDC/ 15A

MAGPRO16
Main Board

«
...
42
43
44
45
46
...
»

Summary of Contents for MAGPRO16
























































Reviews:

No comments

Related manuals for MAGPRO16

Brand: SAFE-T-ALERT Pages: 6

Brand: La Crosse Technology Pages: 2

Brand: U-Prox Pages: 3

Brand: U-Prox Pages: 2

Brand: RainWater Harvesting Pages: 3

X Wireless Series

Brand: Axess Pages: 8

Brand: Digimerge Pages: 44

Brand: Air Specialties Express Pages: 4

Brand: EVE Pages: 43

UTILITY UTAC13-0

Brand: WIA Pages: 8

Smartvest FUSG35000A

Brand: Abus Pages: 4

Brand: Alecto Pages: 76

PRECISION TIG 185

Brand: Lincoln Electric Pages: 104

CIRCOtransfer 30 E

Brand: wagner solar Pages: 32

Brand: U-Prox Pages: 2

Kasa Smart KC310

Brand: TP-Link Pages: 23

DS-75D16 Swingarc

Brand: Miller Electric Pages: 48

MM2040 TOUCHBOX

Brand: Manta Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands