7
En
gl
is
h
Maintenance
Use a soft dry cloth to wipe the surface of the unit clean .
For stubborn smudges, use a damp cloth that has been thoroughly
wrung out to remove excess moisture .
Avoid allowing rubber or plastic materials to touch the unit for
long periods of time because they could damage the cabinet .
Never spray liquid directly on this unit . Do not use chemically-treated
wipes, thinner or similar substances because they could damage the
surface of the unit .
V
For safety, disconnect the power plug from the out-
let before cleaning.
Precautions for use
o
This unit is very heavy, so take care to avoid injury during installation .
o
Do not install this unit in a location that could become hot . This
includes places that are exposed to direct sunlight or near a radia-
tor, heater, stove or other heating equipment . Moreover, do not
place them on top of an amplifier or other equipment that gener-
ates heat . Doing so could cause discoloration or deformation .
o
Avoid locations that are extremely cold or exposed to excessive
humidity or dust .
o
In order to enable good heat dissipation, leave at least 20 cm (8
”
)
between this unit and walls and other equipment when installing
it . If you put it in a rack, take precautions to prevent overheating
by leaving at least 5 cm (2
”
) open above the top of the unit and
at least 10 cm (4
”
) open behind the unit . Failure to provide these
gaps could cause heat to build up inside and result in fire .
o
Place the unit in a stable location near the audio system that you
will use with it .
o
Do not place anything, not even CDs, CD-Rs, LP records or cassette
tapes, on top of the unit . Doing so could cause damage .
o
Do not put cloth on top of the unit or place it on top of bedding
or thick carpet . Doing so could cause it to overheat or damage it .
o
Supply voltage to the power unit that matches the voltage indi-
cated on the rear panel . If you are in any doubt regarding this
matter, consult an electrician .
o
Do not move the unit during use .
o
Do not open the body of the unit because this could result in
damage to the circuitry or cause electric shock . If a foreign object
should enter the unit, contact your dealer .
o
When removing the power plug from an outlet, always pull
directly on the plug . Never pull on the cord itself .
o
Since ES-LINK is a format that is unique to ESOTERIC, do not con-
nect the HDMI cable used for it to ordinary HDMI connectors on
equipment made by other companies . They are not compatible .
Summary of Contents for D-02X
