13
Kongsberg XE
Test line n
Select this function to execute a test figure with the selected tool n. The figure executed is a
square 40 x 40 mm (1.6 x 1.6 inches).
Use this function as a quick way to verify correct adjustments for the different tools.
Circle adjustment line n
The
Circle lag
parameter determines the
quality of circles when cutting with knife.
The value will be different for different
materials.
Complete this wizard to obtain a proper
adjustment of the
Circle lag
parameter.
Select between two different circle sizes,
R=15 and R=40 mm.
Note: We recommend that the
Circle lag
value is set to 0 before the first figure is
executed.
13.5 Extended
For each line in Job Setup, an
Extended Setup
is available:
- This button face indicates that some of the extended parameters are set.
- This button face indicates that none of the extended parameters are set.
81
