10
Kongsberg XE
Insert the knife tool in the tool head and run the same job.
10.4 Work with Register Bar
The
Register Bar
is an aid when the material needs registrations that fits the requirements of
a specific printing press or die cutter.
On XN, the register bar is mounted along the X
- axis as illustrated at left.
• Register bar - Register bar fixed to the table.
• Material - Sheet of material with pre-
punched holes that fit the Positioning pins
on the Register bar.
• Positioning pins. Use these pins to fix the
sheet of material in a correct position on
the table. When the sheet is fixed and
vacuum is switched on, you must remove
the pins.
• Cutting underlay - Cutting underlay.
• Area not available for tools - This area is
outside the working area of the machine.
Work Flow
• Place the sheet of material onto the cutting
table and align the holes in the material
with the positioning pin holes.
• Insert the positioning pins.
53
