9
Kongsberg XE
9.5 Flute/Grain Direction
Use the
Toggle Flute Direction
button to set correct direction for the actual job.
Verify that the
Flute/Grain Direction
corresponds to the material.
9.6 Vacuum Section Selection
From the
Vacuum Section
setup – dialog, configure a suitable vacuum area for the job.
Select
Vacuum Sections
that corresponds to the outline of your material.
Proper selection is important to achieve the best possible material hold down.
9.7 Speed Setting
Specify if this is a
High Accuracy
or
High Speed
job.
The machine speed during execution will have important impact on the final result.
For some combinations of tools and materials, you can run with full speed, for other
combinations, the speed and/or the acceleration has to be reduced. For this purpose, the
following alternatives are available:
• Select between High Quality, Normal or High Speed mode (
Options
->
System Option
-
>
System
).
• Reduce the overall acceleration (
Options
->
System Option
->
Speed Setup
->
Acceleration
).
• Reduce the speed and acceleration for the Job setup line (
Job Setup
).
47
