12
Kongsberg C-series
Single Cut
Double Cut
This is the default mode if neither
Single Cut
nor
Triple Cut
are enabled.
Triple Cut Function
To ensure proper folding of rigid materials,
use this function to remove material from the
middle of the cut.
Note:
• This function is working along Y only. Flute
direction must be along Y.
• The numbers indicates sequence of
operation.
This illustration shows a typical use of
Triple
Cut Function
.
The middle wall is not cut by (2) or (3), making
the material impossible to fold.
The
Triple Cut Function
(1) cut the middle
wall and you can fold the material nicely.
Geometry
85
