10
Kongsberg C-series
10.
System Setup
10.1. Introduction
This chapter will explain functions and parameters that are important for the
C system
to run
properly.
It is a supplement to the information available from the
User Manual for i-cut Production
Console
.
Examine each step carefully to ensure proper settings:
One time adjustments completed at the factory
The functions are included here as a reference.
They are not used during normal operation.
If necessary, they should be repeated, as indicated in the function description.
1
Adjust X1 to X2 Angle
2
Register Table Size
3
Adjust Measuring Station Position
4
Set Ruler Position
5
Set Main Reference Point
6
Map Table Top Surface
7
Calibrate Foot on Measuring Station
8
Vacuum Setup
9
Router Setup
Adjustments to customize the table
1
Select Reference Point
52
