ESI Feature Phone User Manual Download Page 61

Page: 61 / 102

User’s Guide

Special keys

F.5

Repeat steps 1–2 until the name is complete. The name may contain up to 12 characters (a space

is a character, too).

Press # again when finished entering the name.

Now, enter the

number

— including, if necessary, the line access code

(or

71–76

Note:

Use the

scroll key to enter special characters; use the

scroll key to backspace. You also

can use the scroll keys to view the number after it’s saved. To change the number, you must
delete it and then re-enter it as desired.

Press

to confirm the entry.

Manual method (on the 48-Key Feature Phone)

While your station is idle (or just after receiving dial tone), press

ESI-DEX

. This causes the

Esi-Dex

menu

to appear, as shown:

Note:

Your display may differ, depending upon the availability of certain Dexes on your system.

Press

PER

to choose the Personal Dex.

The display now reads:

Press

NEW

To enter each character for the

name

, press the dialpad key that includes the desired character.

The key’s possible character entries will change each time you press the key.

When the desired character appears, press

to confirm its entry. The cursor will move to the next

character position. Use

and

(the scroll keys) to back up or to insert a space.

Example:

To enter a

, press

twice (the possible options to scroll through are

A, B, C

and

2).

When

appears, press

to confirm and move to the next entry.

Repeat steps 4–5 until the name is complete. The name may contain up to 12 characters (a space

is a character, too).

(Continued)

Summary of Contents for Feature Phone







































































































Search results

Summary of Contents for Feature Phone

Reviews:

ESI Feature Phone, User Manual, Page: 61 / 102

Search results

Summary of Contents for Feature Phone

Reviews: