User’s Guide
Special keys
F.3
Auto-dialing using Esi-Dex
. . . On the 24-Key Feature Phone
1.
While your station is idle (or just after receiving internal dial tone), repeatedly press
ESI-DEX
to
select the desired Dex:
Notes:
System Dex and Location Dex aren’t available on every system.
For the remainder of this example, we’ll assume you selected Personal Dex. However, the
procedure is the same for any of the other Dexes.
2.
Choose the desired name from the selected Dex, using one of two methods.
Either:
(a.)
Scroll
— Press the scroll keys (
and
) to look up and down through the Dex until you find
the name (names will appear in the order in which they were stored in the Dex).
. . . Or . . .
(b.)
Dial-by-name
— Dial up to the first three characters
1
of the extension, department, or guest
mailbox name. For example: if you want to call John Doe, dial
5 6 4
(because it spells
J O H
).
You’ll begin to see names that begin with those letters. You can then use the scroll keys (
and
) until you find the desired name and number.
3.
Press
ESI-DEX
again to dial the number.
. . . On the 48-Key Feature Phone
1.
While your station is idle (or just after receiving dial tone), press
ESI-DEX
. This causes the
Esi-Dex
menu
to appear, as shown:
2.
Press a key to choose the appropriate Dex —Station Dex (
STA
), System Dex (
SYS
), Location Dex
(
LOC
) or Personal Dex (
PER
) — or press
RELEASE
to cancel the procedure.
Notes:
System Dex and Location Dex aren’t available on every system.
For the remainder of this example, we’ll assume you selected Personal Dex. However, the
procedure is the same for any of the other Dexes.
The display now reads:
(Continued)
1
You can also dial just one or two characters, and then press
#
to enter.