ESI Feature Phone User Manual Download Page 32 | Manualshive

Page: 32 / 102

ESI Feature Phone User Manual Download Page 32

User’s Guide

Voice mail operation

D.11

Active E-Mail destination for your extension

On your ESI Feature Phone:

1.

Press

PROGRAM 6 5

to reach the Mobile Messaging options.

2.

Press

1

to reach the Active E-Mail setting. Then . . .

If currently set for . . .

. . . to switch to . . .

press . . .

Main E-Mail

Alternate E-Mail

1

and then

#

to confirm

Alternate E-Mail

Main E-Mail

0

and then

#

to confirm

[To keep your current setting]

#

to confirm

3.

Either

(a.)

hang up (or press

RELEASE

) to complete programming or

(b.)

skip to step 2 of “Main

E-Mail and Alternate E-Mail settings for your extension” (next item).

Main E-Mail and Alternate E-Mail destinations for your extension

On your ESI Feature Phone:

1.

Press

PROGRAM 6 5

to reach the Mobile Messaging options.

2.

Press either:

•

2

to reach the Main E-Mail destination setting.

. . . or . . .

•

3

to reach the Alternate E-Mail destination setting.

3.

Enter a destination address to which the ESI system will send notification e-mails when using

the setting you selected (Main E-Mail or Alternate E-Mail) in step 2. You may enter up to 64
characters for this destination address.

To enter each character, press the appropriate key on the Feature Phone’s dialpad until the
desired character is displayed, and then press

#

to enter the character.

Exceptions

include:

• To enter the “

@

” character, press

# #

.

• To enter a dot (period), dash, or underscore, press

0

(zero)

#

.

• To back up to a previously entered character, use the left scroll key (

).

4.

To confirm the address, press

#

once more.

5.

Select whether to include a .WAV attachment with each e-mail notification while in the setting

you selected in step 2, by pressing either:

•

1

to include the attachment.

. . . or . . .

•

0

not to include the attachment.

6.

Hang up (or press

RELEASE

) to complete programming.

Active E-Mail destination for your guest mailbox

On your ESI Feature Phone:

1.

Press

PROGRAM

.

2.

Enter the number, followed by the password, of the guest mailbox you wish to program.

3.

Press

PROGRAM 5 6 5

to reach the Mobile Messaging options.

4.

Press

1

to reach the Active E-Mail setting. Then . . .

If currently set for . . .

. . . to switch to . . .

press . . .

Main E-Mail

Alternate E-Mail

1

and then

#

to confirm

Alternate E-Mail

Main E-Mail

0

and then

#

to confirm

[To keep your current setting]

#

to confirm

5.

Either

(a.)

hang up to complete programming or

(b.)

skip to step 2 of “Main E-Mail and Alternate

E-Mail settings” (next item).

«
...
30
31
32
33
34
...
»

Summary of Contents for Feature Phone







































































































Reviews:

No comments