www.escene.cn/en
Escene Communication
7
2.Connecting Your Phone
Your system administrator will likely connect your new WS330-PEGV4 IP Phone to the corporate
IP telephony network. If that is not the case, refer to the graphic and table below to connect your
phone.
1) Open the WS330-PEGV4 IP Phone box; carefully check the packing list, Packing List as
follows:
Item
Counts
IP Phone
1
Handset
1
Handset Cord
1
Power adapter
1
RJ45 cable
1
Quick Installation
1
Product certification 1
2) As shown in figure 2.1 and figure 2.2, Please plug Handset Cord into RJ11 interface(IP
Phone and Handset), RJ45 cable into the LAN interface
；
IP Phone will automatically start if IP
Phone with POE function.
3) The phone must work together with power adapter without POE support.
4) Connect your computer to PC interface of the phone with cable.
* More detailed description please refers to the
3.Phone overview-Understanding phone
buttons and hardware
.
Figure 2.1 Interfaces of SayHi WS330-PEGV4
Figure 2.2 Foot stand of SayHi WS330-PEGV4
