www.escene.cn/en/
Escene Communication
--5) Set up the above parameters, select “Submit changes” to saves
settings, Complete the account creation.
*
Note
: the parameters with the * mark must be set.
Disable sip account
--1) Select “System setting” > “Advanced setting”
；
--2) Enter the password required
（
The default is empty)
；
--3) Select “SIP” > “Account sip”
；
--4) Select “Enable account” > “Disable”
；
--5) Select “Submit changes” to saves settings
6.2 Network Setting
If you want to …
Then…
network setting
--1) Choose “System setting” > “Advanced setting”
；
--2) Enter the password required
（
The default is empty)
；
--3) Choose “Network”, you can configure the following parameters:
-
Type
: static IP or DHCP
-
IP
: enter IP address , Note: Do not duplicate the IP address with
other devices on the network
-
Mask
: enter appropriate subnet mask
-
GW
: enter appropriate gateway
-
DNS1
: enter IP address of the primary DNS server
-
DNS2
: enter IP address of the secondary DNS server
-
Web port
: the default Web port is 80,if you change it(for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-
Telnet port
: the default Telnet port is 23,if you change it(for
example change it to 2003),you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
