ESD QUICK 713, Instruction Manual

Page: 6 / 26

5
2. Connection
(1) Connect the connector plug of the iron handle cord to the socket “TOOL1” in front of the soldering
station. Take notice of the inserting position of connector plug.
(2) Place the soldering iron in the iron holder.
Turn clockwise firmly
Align the grooves and pins and
push stranght in
4.2 Connection of the De-soldering Tool Gun
4.2.1 Names of De-soldering Gun
Nozzle:
Transmits heat for melting solder. It is entrance of the melted solder. Expendable part.
Filter Pipe:
Inside it, there is the ceramic paper filter (s) and spring filter pipe of the melted solder and flux.
Spring filter pipe is expendable part.
Back Holder Assembly:
Secures the filter pipe.
Release Knob:
Push down to remove the filter pipe.
Indicator:
Indicate when nozzle and heating element need cleaning and when filters need replacing.
Hose:
Connects to the outside filter.
Trigger:
Squeeze to start absorption. Do not pull the trigger before fully heating the nozzle.
Heating Element:
Require clean of its Inside.
Cord Assembly: Connects to the receptacle
4.2.2 Use of the Sponge and the Gun’s Holder
1. Take out the de-soldering gun and put it in gun’s holder.
2. Dampen the cleaning sponge with water and then squeeze it dry. Be sure to remove the round portion of the
sponge and place it in the holder.
3. Connect the metal plug of cord assembly to the receptacle (marked
“
TOOL2
”
) .
Nozzle
Filter pipe
Back Holder Assembly
Release Knob
Indicato
Heating Element
Trigger
Hose
Cord Assembly