ESD QUICK 713, Instruction Manual

Page: 7 / 26

6
4. Connect the external filter to the tie-in’s hose on the unit, in accordance with the mark on the external filter,
need to insert fully, and connect the other side of filter to de-soldering gun’s hose.
Note: The external filter has connection orientation, and it muse be connected according to the
mark, otherwise affect suction.
4.3 Connection of the SMD Rework Part
Select suitable nozzle to install. After that, put the re-soldering handle on the holder.
4.4 Connection of the Main Unit
1. Insert the power plug into the grounding power socket.
2. Connect one end of grounding cord to the grounding hole of the soldering station and the other to ground.
3. Switch on the power supply.
Ⅴ.Parameter Setting
5.1 Menu and Parameter Setting
5.1.1 Enter into the Menu
1. Turn off the power switch.
2. Press and hold the “INFO” and “VACUUM” keys simultaneously and not loosen, and then turn on the power
switch. At the time, the LCD shows . After that, the LCD shows (as followings).
Which means it has come into the password inputting interface of the menu setting. Only when the inputting
password is right, it can enter into the menu setting.
3.
Input password:
Click the “TEMP
▲”
or
“
TEMP
d
”
key to input 100’s digit. And then click the “VACCUM”
key when the selected value of the 100’s digit displaying and then into the 10’s digit set. The setting methods
of the 10’s digit and 1’s digit are same with the 100’s digit.
4. There are two times to input the password. If the inputting password is not right at the first time, the process
returns the password-inputting window at once. If the password inputting is error two times continues, it
comes into the work state and the displaying will shows “ “, at the time, temperature and airflow cannot be
set.
5. If the password is right, the displaying window will display “ ”, and then click “VACUUM” key into the
menu setting state. The window shows “set”, at the time, it can change the parameters of the menu.
Connect to main unit
Fully insert filter into the
Filter is expendable.
Connect to gun
Airflow direction