ESD QUICK 713 Instruction Manual Download Page 4

Page: 4 / 26

Ⅲ. Specification and Characteristic

3.1 Soldering Iron Part

3.1.1 Specification of the Soldering Part

Power 60W

The temperature range of the iron 200

℃

~480

℃

The time range of the sleeping 0~99 (unit: minute)

Temperature Stability

℃

(Without air flow and no load)

Highest Ambient Temperature 40

℃

Tip to Ground Resistance <2

Tip to Ground Potential <2mV

Heating Element Electromagnetic heater

3.1.2 Characteristic of the Soldering Part

Recovery of the temperature and calefactive is rapid and exactly. Display the temperature with the large LCD

by microcomputer and Control the temperature by PID. Especially it is suitable to the lead free soldering.

Lock the calibration and the parameter setting with the password.

Digital adjustment of the temperature and with functions of sleeping or shut off one tools.

Digital calibration and operate conveniently and easy.

Various types of tips are available and replace tips conveniently.

The soldering handle is light and use is comfortable.

3.2 De-soldering Tool Part

3.2.1 Specification of the De-soldering Tool

Power of the pump 12V/2A

Power of heating 90W

Temperature of nozzle 200

℃

~480

℃

(See the working mode table)

Pump Diaphragm pump

Vacuum suction 600mmHG

Nozzle to ground resistance Less than 2

Nozzle to ground potential Less than 2mV

The time range of the sleeping 0~99 (unit: minute)

3.2.2 Characteristic of the De-soldering Tool

Powerful built-in vacuum pump, without connecting the outer vacuum system.

Sensor closed-loop temperature control for heating system, precise temperature.

Heater which is 36V powered is fully isolated form mains. Safe and reliable.

Key type adjusting parameters and with auto sleeping function.

Temperature calibrate digitally.

Suction nozzle and heater are specially designed so that even the melting solder can be absorbed into the filter

Summary of Contents for QUICK 713



























Search results

Summary of Contents for QUICK 713

Reviews:

Related manuals for QUICK 713

Brands by name

Popular brands

ESD QUICK 713, Instruction Manual

Search results

Summary of Contents for QUICK 713

Reviews:

Related manuals for QUICK 713

Brands by name

Popular brands