P
AGE
29
T
UNE
B
ASE
200 I
NSTALLATION
& U
SER
’
S
G
UIDE
- M21201-01A1
C
HAPTER
2 - S
ETTING
U
P
T
UNE
B
ASE
200
Connecting CD Changers Using RS-232 Cables
!
Use an RS-232 cable (not supplied) with connectors made specifically so that
one end connector fits the pin configuration for TuneBase 200 and the other
end connector fits the pin configuration for your specific CD changer. Refer to
Appendix A for the pin configurations.
"
Insert one end of the cable (the TuneBase 200 connector end) into an RS-232
COM port on TuneBase 200. There are 3 available COM ports.
#
Insert the other end of the cable (the connector that fits the CD Changer) into
the RS-232 port on the CD Changer.
$
To connect additional CD changers, repeat steps 1 through 3 using the other
COM ports. See next page.
!
Refer to Appendix A for cable
pin-out configurations.
