630502_4
DS
1400 Indoor Outdoor Installation
Convert the Fire - Double Sided Model
1. On the back of the fire (the side facing the window) remove one scew from each of the four tabs at the bottom of the
chassis and set them from “close position” to “open position” (shown below). Pull each pair of tabs together to shift the
position of the air vents inside the fire. Be careful to not damage the tabs when pulling them out.
2. On the back of the fire, remove the bottom trim (shaded in grey below). If necessary, insert a large slotted screwdriver
into the lance forms and twist.
3. Continue from Step 12 of the single sided fire conversion instructions.
Open Tabs
Closed Tabs
2
Bend tab
up to
vertical
position
3
Pull tab
out to the
next
perforated
section
Bend tab up
at the
perforated
mark.
4
Open
Replace
the screw
1
Close
5
Remove
the screw
!
Please Take
Extra Care on
this STEP
