630502_4
DS
1400 Indoor Outdoor Installation
Arranging the LED Strip
Place the flexible silicon LED strip in the ‘LED Placement Zone’ in the prepared cavity (as shown in the diagram below).
15mm
15mm
DS1400 Fire
LED Placement Zone
Inlet Air Cavity
Window
xx
150mm
Position the LED strip so that the luminous surface is facing up. This will allow the most light to show through the bottom
cavity extension. The LED strip may be secured using double sided tape, but this is not required. It sits on the base of the
fireplace cavity beneath the slotted bottom cavity extension.
Luminous Surface
Operating the LED System
Turning the LEDs on
Press the On/Off button to turn the LEDs on.
Note: If the remote is left inactive for more than 1 minute, the remote will turn off but the LEDs will remain on. Push the On/Off
button to turn the remote on.
Selecting a Colour
Touch the colour selection wheel to choose a colour.
Changing the Brightness
Press to decrease the brightness.
Press to increase the brightness.
