2
P
R
E
-
A
S
S
E
M
B
L
Y
T
I
P
S
P R E - A S S E M B L Y T I P S
8” Adjustable Wrench
Rubber Mallet
¼” tip drift punch or 5/16” dia. X 8” long metal rod
(to assist with hole alignment)
Utility knife or Rat Tail file
(to clear excess paint from holes)
Funnel
3/8” Allen Wrench
Materials to cushion parts during assembly
(to prevent scratches/dings)
Wooden Block (at least 3”x3”)
1. Read this manual carefully before starting assembly.
Read each step completely before beginning each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before assembling or ordering
parts.
3. To make assembly easier, use the Hardware Identifier on page 7 to identify and sort all fasteners. Check all cartons for kits.
All hardware may not be located in one kit.
Please keep your box
it could be used as an assembly aid. See page 29.
4. Do not tighten hardware until instructed to do so. If hardware is tightened too soon, mounting holes may not align and
parts may not easily fit together. Leave locknuts slightly loose until you are instructed to tighten them.
5. Save these instructions and your proof of purchase (receipt) in the event that the manufacturer has to be contacted for
replacement parts.
6.
Tools required for assembly:
Tools recommended for assembly:
WARNING
FAILURE TO FOLLOW THESE WARNINGS MAY
R E S U LT I N S E R I O U S I N J U R Y A N D / O R
PROPERTY DAMAGE.
Owner must ensure that all players know and
follow these rules for safe operation of the system.
!
Do not climb on the basketball stand;
!
Do not hang on the rim/basket;
!
Not intended for basketball games with
competitive character, only suitable for
practice of throwing techniques
!
Install only on flat solid ground;
!
Do not use in extreme wind or bad weather, the
basketball stand could tip over!
!
Please empty the water over the winter time.
Frost could destroy the ballast.
!
We recommend storing the equipment in a dry
place over the winter.
2L-7903-00
2020 Escalade Sports
3/8” drive ratchet wrench
3” or longer extension
#2 Philips Head Screw Driver
10mm socket and wrench
13mm socket and wrench
16mm socket and wrench
17mm socket
19mm socket and wrench
4’ step ladder or other 4’ support
Contact HAMMER SPORT AG at:
Tel:
E-mail: [email protected]
0731-97488-41
Please Do Not Return This Product To The Store!
Hammer Sport AG
Abt. Kundendienst
Von-Liebig-Str. 21
89231 Neu-Ulm
Summary of Contents for GOALIATH B8301EF
Page 42: ...42 42...
