manualshive.com logo in svg

Esaote MyLab 9VET, Getting Started

Share
Download
Esaote MyLab 9VET Getting Started Download Page 9

I N D E X

MyLab

  -   G E T T I N G   S T A R T E D

ix

GETTI

NG STARTED

Table of Contents

Manufacturer’s Address............................................................................. i-iii
Important Information .............................................................................. i-iii
Guarantee..................................................................................................... i-iv
Trade Marks................................................................................................. i-iv
EC Declaration of Conformity.................................................................. i-v
RED Declaration of Conformity ............................................................. i-vi

1 Introduction.................................................................................. 1-1

Safety and Standards.......................................................................... 1-1
Getting Started ................................................................................... 1-1
Probes and Consumables.................................................................. 1-1
System Data ........................................................................................ 1-1
Advanced Operations Manual  ........................................................ 1-2

Intended audience....................................................................................... 1-3
Veterinary Use............................................................................................. 1-3
Disclaimer .................................................................................................... 1-3
MyLab use.................................................................................................... 1-5
MyLab Manual Conventions..................................................................... 1-5
Manufacturer’s Responsibility................................................................... 1-6
Product Life Cycle ...................................................................................... 1-6

Life Time .................................................................................................. 1-6
Maintainability Time ............................................................................... 1-7
End-of-Life Disposal .............................................................................. 1-7

Usage License Agreement for the Software Included in the 
Apparatus..................................................................................................... 1-7

Proprietary Rights.................................................................................... 1-8
License Rights and Limitations ............................................................. 1-8
Third Part Software................................................................................. 1-9

Product Traceability ................................................................................... 1-9
Vigilance System ....................................................................................... 1-11

2 Additional Information on Safety ................................................ 2-1

Environmental Safety................................................................................. 2-1
Electromagnetic Compatibility ................................................................. 2-2

Electromagnetic Emissions.................................................................... 2-2
Essential performance ............................................................................ 2-3
Electromagnetic Immunity .................................................................... 2-3

Electromagnetic Immunity for All Medical Equipment .............. 2-4
Electromagnetic Immunity for Medical Equipment not Life 
Supporting........................................................................................... 2-5

Summary of Contents for MyLab 9VET





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands