Esaote MyLab 9VET, Getting Started

Page: 29 / 116

A D D I T I O N A L I N F O R M A T I O N O N S A F E T Y
MyLab
- G E T T I N G S T A R T E D 2 - 3
GETTI
NG STARTED
WARNING
Use of accessories, transducers and cables other than those specified or
provided by the manufacturer of this equipment could result in increased
electromagnetic emissions or decreased electromagnetic immunity of this
equipment and result in improper operation.
WARNING
Portable RF communication equipment (including peripherals such as
antenna cables and external antennas) should be used no closer than 30 cm
(12 inches) to any part of
MyLab
, including cables specified by the
manufacturer. Otherwise, degradation of the performance of this
equipment could result.
Essential performance

Free from noise on a waveform or artifacts or distortion in
an image or error of a displayed numerical value which
cannot be attributed to a physiological effect and which may
alter the diagnosis.

Free from the display of inaccurate numerical values
associated with the diagnosis to be performed.

Free from the display of inaccurate safety-related indications.

Free from the production of unintended or excessive
ultrasound output.

Free from the production of unintended or excessive
transducer assembly surface temperature.

Free from the production of unintended or uncontrolled
motion of transducer assemblies intended for intra-corporeal
use.
Electromagnetic Immunity
The electromagnetic tests are aimed at simulating the typical transients of an
electromagnetic environment.
MyLab
was tested for immunity to transients
and at their typical levels in a domestic, hospital or commercial environment.