Esaote 350009500, Getting Started, Page: 97 / 114

MyLab
- G E T T I N G S T A R T E D
10 - 1
Chapter
10
GETTI
NG STARTED
10- MyLab Clinical Settings
This chapter describes how to create clinical settings, usually named “Preset”.
Definition of Clinical Settings
One clinical setting is identified by the settings of the following parameters:

real time exam controls,

measurement configuration,

bodymark configuration,

annotation configuration,

eTouch configuration.
This means that the preset, selected at the beginning of the exam or during the
exam by using the
PRO BE
button, establishes the initial settings of the exam
controls (like gray map, depth...) together with the initial available measures
(measurement configuration), the initial available library both for annotations and
for bodymarks (Annotation and Bodymark configurations) and the customized
touchscreen.
How to Create Clinical Settings
To create a new preset or modify an existing preset, follow the procedure below
that is organized in two phases, an on-line phase followed by an off-line phase.
In the on-line phase the operator sets the parameters that optimize the real time
image in all modes and creates the customized preset; in the off-line phase the
Note
When licenced, advanced tool configurations (such as 3D/4D
settings, Stress Echo protocols) are part of the clinical settings.
Refer to the dedicated sections of this manual for further
information on these tools.