Esaote 350009500, Getting Started, Page: 101 / 114

MyLab
- G E T T I N G S T A R T E D
11 - 1
Chapter
11
GETTI
NG STARTED
11- System Maintenance
This chapter describes the main maintenance operations that can be directly done
by the system user.
Inspecting the System
On periodic schedule (or whenever there is a reason to do it) disconnect the system
from the power outlet and check:

all system cables for any cut or damage,

system housings for any damage,

connector status,

LCD and touchscreen status,

movements of all parts composing the system,

trackball movement.
Contact Esaote personnel for any problem found during inspection.
 PC
Refer to “Probes and Consumables” manual for periodic inspections for probes.
Cleaning of System and Peripheral Devices
Periodic cleaning of the system and any connected peripheral devices is important.
Peripherals may contain dust on sensitive parts, the reliability of which could be
compromised in the event of poor maintenance.
Note
Periodic maintenance operations that require the access to the
system can be performed only by trained personnel: contact the
local Esaote Service for further information on required periodic
inspections.