Esaote 350009500, Getting Started, Page: 32 / 114

MyLab
- G E T T I N G S T A R T E D
2 - 6
The operator must remember that the intensity of the electromagnetic fields
generated by fixed transmitters (for example radio-base stations for cellular or
cordless telephony, TV and radio transmissions, amateur radio transmissions)
cannot be predicted on a theoretical basis. Consequently, a direct measure may be
necessary in the use environment of a
MyLab
system. If the intensity of the
electromagnetic fields exceeds that specified in the immunity levels shown in the
previous tables, and the echographic system performs incorrectly, additional
measures may be necessary, for example by positioning the system in a different
way.
Wireless Requirements
MyLab
is equipped with built-in wireless capability. The led placed on the right side
of the control panel indicates the wireless status: either blue when wireless
connection has been activated or completely off.
When wireless is active, the operator should make sure to stay at a minimum
distance of 20 cm from the rear of the equipment. If it is necessary to work at a
shorter distance, temporarily switch the wireless device off.

SS
Refer to the “Safety and Standards” manual for further information on restrictions
for the use of wireless connections.
Note
The wireless capability has to be considered as an intentional RF
(Radio Frequency) transmitter as indicated by the symbol:
When the wireless is active,
MyLab
might interfere with other
equipment.