ESAB POWERCUT-1250, Installation, Operation And Service Manual

Page: 29 / 44

213
1.0 GENErAL
The Powercut-1250 / 1500 is a compact, completely self-contained plasma cut-
ting system. The system is shipped with the PT-21AMX mechanized torch. Torch
must be wired to the console before operation. See section 2.6.1. The system is
ready to cut after connections are made to the torch, input power and a source
of compressed air (90-150 psi / 6.2 to 10.3 bar). The mechanized Powercut pack-
age uses the PT-21AMX mechanized plasma torch to deliver cutting power for
severing materials up to 1-1/2 inch (38.1mm) thick on the PC-1250 and 1-3/4
inch (45mm) thick on PC-1500. Refer to the following pages for descriptions of
the Powercut packages available as well as performance specifications.
1.1 SCOPE
The purpose of this manual is to provide the operator with all the information
required to install and operate the Powercut plasma arc cutting package. Tech-
nical reference material is also provided to assist in troubleshooting the cutting
package.
Use only the ESAB PT-21AMx Plasmarc
torch with this console. Use of torches not
designed for use with this console could
create an ELECTrIC SHOCK HAZArD.
"Single Voltage" Version Back View
Typical front View
SECTION 1 DESCrIPTION