ESAB POWERCUT-1250, Installation, Operation And Service Manual

Page: 9 / 44

193
1.0 GENErAL
The Powercut-1250 / 1500 is a compact, completely self-contained plasma cutting
system. As shipped, the system is fully assembled and ready to cut after being
connected to input power and a source of compressed air (90-150 psi / 6.2 to
10.3 bar). The Powercut package uses the heavy-duty PT-32EH (Manual Plasma)
torch to deliver cutting power for severing materials up to 1-1/2 inch (38.1mm)
thick on the PC-1250 and 1-3/4 inch (45mm) thick on the PC-1500. Refer to the
following pages for descriptions of the Powercut packages available as well as
performance specifications.
1.1 SCOPE
The purpose of this manual is to provide the operator with all the information
required to install and operate the Powercut plasma arc cutting package. Tech-
nical reference material is also provided to assist in troubleshooting the cutting
package.
Use only the ESAB PT-32EH Plasmarc
torch with this console. Use of torches not
designed for use with this console could
create an ELECTrIC SHOCK HAZArD.
"Single Voltage" Version Back View
Typical front View
SECTION 1 DESCrIPTION