ESAB Migmaster 275, Instruction Manual

Page: 19 / 58

19
sectIon 2 IntroDuctIon
gunMaster-250 stanDarD DutY noZZles & tIp aDapter w/ Std Contact Tips w/ HD Contact Tips
3/8" Nozzle 0558001609 COPPER Flush with nozzle Recessed 1/8" into nozzle
1/2" Nozzle 0558001612 COPPER Recessed 1/8" into nozzle Flush with nozzle
1/2" Nozzle 0558001611 COPPER Flush with nozzle Extends1/8" out of nozzle
1/2" Nozzle 0558001613 COPPER Extends1/8" out of nozzle Extends1/4" out of nozzle
5/8" Nozzle 0558001614 COPPER Flush with nozzle Extends1/8" out of nozzle
5/8" Nozzle 0558001615 COPPER Extends1/8" out of nozzle Extends1/4" out of nozzle
SPOT Nozzle 0558001602 BRASS Recessed 3/8" into nozzle Recessed 3/8" into nozzle
Tip/Nozzle Adapter 0558001608 BRASS
gunMaster-250 heaVY DutY noZZles & tIp aDapter
w/ Std Contact Tips w/ HD Contact Tips
5/8" Nozzle 0558001599 COPPER Recessed 1/8" into nozzle Flush with nozzle
5/8" Nozzle 0558001600 COPPER Recessed 1/4" into nozzle Recessed 1/8" into nozzle
5/8" Nozzle 0558001598 COPPER Flush with nozzle Extends1/8" out of nozzle
SPOT Nozzle 0558001602 BRASS Recessed 3/8" into nozzle Recessed 1/4" into nozzle
Tip/Nozzle Adapter 0558001888 BRASS
2.4.5 spool spacer
For 8" dia. spools .........................................................P/N 17511
For 10" dia. spools ......................................................P/N 34330
taBle 2.2 MIgMaster 275 / gunMaster 250 Wear parts
taBle 2.3 gunMaster 250 noZZles & tIp aDapter
Wear parts gunMaster 250 WIre feeDer
Wire size
contact tip
std Duty
contact tip
heavy Duty
liner
*
DrIVe roll groove
type
outlet
guIDe
Inlet
guIDe
.023" (0.6MM) Hard 20543 0558001675 0558008700 V- Solid 0558008651 23612461
.030"(0.8mm) Hard
20544 0558002367 37031 0558008700 V- Solid 0558008651
23612461
.035" (0.9mm) Hard 996995
0558002368
37032 0558008536
V- Solid
0558008650
34615
.040" (1.0mm) Hard
0558002369
37032 0558008536
V- Solid
0558008650
34615
.045" (1.2mm) Hard 37290 37286
37032 0558008536
V- Solid
0558008650
34615
.035" (0.9mm) Cored 996995 0558002368 37032 0558008540 K- Cored 0558008650 34615
.045" (1.2mm) Cored 37290 37286 37032 0558008540 K- Cored 0558008650 34615
.052" (1.4mm) Cored 2075349 17778 37033 0558008541 K- Cored 0558008649 0558001758
.062" (1.6mm) Cored 996997 37291 37033 0558008541 K- Cored 0558008649 0558001758
3/64" (1.2mm) AL
996999 17765 37034** 0558008538 U - Soft 0558008654
23612461
1/16" (1.6mm) AL
948835 37040** 0558008538 U - Soft 0558008654
23612461
* All Liners supplied 15 ft. and must be trimmed to fit the gun per instructions.
** Requires Jumper Liner Sleeve 0558003050
Bold indicates "as supplied from factory".
2.4.6 primary extension cord
25 ft. (9.5m) / 50 Amp ..................................................P/N 37833
2.4.7 gas Meter
Measures shield gas flow at the nozzle .................P/N 19043
2.5 MIgMaster 275 / gunMaster 250 Wear parts