ESAB Aristo 1000 AC/DC SAW, Instruction Manual, Page: 7 / 32

© ESAB AB 2012
- 7 -
bb01de
Aristo 1000
Operating temperature -10 to +40
°
C
Transportation temperature -20 to +55
°
C
Dimensions lxwxh 865 x 610 x 1320 mm
Weight 330 kg
Insulation class H
Enclosure class IP 23S
Application class
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or cut at
a certain load without overloading. The duty cycle is valid for 40
°
C.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP 23S is designed for indoor and outdoor use; however, should
not be operated in precipitation.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
Mains supply, S
sc min
Minimum short circuit power on the network in accordance with IEC 61000-3-12
4 INSTALLATION
The installation must be carried out by a professional.
The power source must be calibrated by a professional.
CAUTION!
Installation shall be made to a symmetrical 3 phase system in respect to safety ground.
Intended for fixed installation.
Note
Mains supply requirements
High power equipment may, due to the primary current drawn from the mains supply, influence the
power quality of the grid. Therefore connection restrictions or requirements regarding the
maximum permissible mains impedance or the required minimum supply capacity at the interface
point to the public grid may apply for some types of equipment (see technical data). In this case it
is the responsibility of the installer or user of the equipment to ensure, by consultation with the
distribution network operator if necessary, that the equipment may be connected.
Note
The power source can be connected for generator power. For more information, contact
authorised ESAB service personnel.
GB