ESAB Aristo 1000 AC/DC SAW, Instruction Manual, Page: 13 / 32

© ESAB AB 2012
- 13 -
bb01de
5.2 Connection of welding and return cable
Ensure that the welding and return cables are installed as illustrated.
5.3 Key to symbols
Power source ON Power source OFF
Remote controlled start
Local control from the
power source
Fault indication
5.4 Overheating protection
The welding power source has overheating protection that operates if the
temperature becomes too high. When this occurs, the welding current is interrupted
and the yellow indicating lamp comes on. A fault code appears in the control unit
(PEK) settings panel.
The overheating protection resets automatically and the welding process can be
restarted when the temperature has fallen.
GB