ESAB Aristo 1000 AC/DC SAW, Instruction Manual, Page: 6 / 32

© ESAB AB 2012
- 6 -
bb01de
Dispose of electronic equipment at the recycling facility!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical and/or
electronic equipment that has reached the end of its life must be disposed of at a
recycling facility.
As the person responsible for the equipment, it is your responsibility to obtain
information on approved collection stations.
For further information contact the nearest ESAB dealer.
2 INTRODUCTION
Aristo 1000 is a welding power source intended for high productivity submerged arc
welding with direct current (DC) or alternating current (AC). The power source has
many setting options for those who want to optimise their welding process.
The welding power source is used together with control unit PEK and the welding
process parameters are regulated via it.
The power source is part of ESAB's A2 / A6 system, which means that most of the
components from this system can be used with Aristo 1000.
Components such as:
S
Welding tractors
S
Column and boom
S
Welding heads
S
Positioning equipment
S
Joint tracking equipment
S
Flux handling systems.
ESAB's accessories for the product can be found on page 27 .
3 TECHNICAL DATA
Aristo 1000
Mains voltage 380 - 575 V,
$
10%, 3
∼
50/60 Hz
Mains supply S
sc
min 6.7 MVA
Primary current I
max
86 A
Setting range 14 - 50 V / 0 - 1000 A
Permissible load
100% duty cycle 1000 A / 44 V
Power factor at maximum current 0,93
Efficiency at maximum current 85 %
Open-circuit voltage with VRD U
0
max 121 VDC
Apparent power at maximum current 58,1 kVA
Active power at maximum current 52,0 kW
No-load power 200 W
GB