ESA VT130W, Hardware Manual

Page: 859 / 976

405.1200.037.2 - Rel.: 2.21 of 25/02/2008
38-53
COMMAND 42 : Command makes internal LEDs light up flashing
Word Value/Meaning
0
42
Lights up internal VT LEDs corresponding to the bits of the words of parameters 1 and 2, uniting in a
single command both commands 33 and 34.
1 See Command 33 or 34
2 See Command 33 or 34
3 Not used
COMMAND 43 : Acknowledgement of all alarms together
Word Value/Meaning
0
43
Tacita tutti gli allarmi presenti.
1 Not used
2 Not used
3 Not used
COMMAND 44 : Force transfer mode
Word Value/Meaning
0
44
In the VT activate the transfer mode of the project (project, firmware and recipes), directly selecting the
source and the transmission speed.
1
Select source for transfer
Allows the selection of the source from which to receive/transmit the project.
The possible choices are:
0 MSP
1 ASP
2 Memory Card
2
Select the transmission speed
Allows the selection of the speed of transfer when the source selected is MSP or ASP; this parameter
is not considered with other sources.
The possible choices are:
0 300 bit/sec
1 600 bit/sec
2 1200 bit/sec
3 2400 bit/sec
4 4800 bit/sec
5 9600 bit/sec
6 19200 bit/sec
7 38400 bit/sec
8 57600 bit/sec
9 115200 bit/sec
3 Not used
COMMAND 45 : Saving the alarm history buffer and/or trend buffers
Word Value/Meaning
0
45
Makes it possible to save all the ISA alarm registrations from the history buffer and/or save all trend
buffers permanently.
1 Not used
2 Not used
3 Not used
COMMAND 46 : Command for operating working of touch screen
Word Value/Meaning
0
46
With this the touch screen can be activated or deactivated. When the touch screen is deactivated pres-
sure on the glass remains withoout effect.
1
Select operation
The choices possible are:
0 Not active (no pressure detected)
1 Active
2 Not used
3 Not used